Product ID:TBA 410 GASKET
MSDS Date:09/09/1994
FSC:5330
NIIN:00-722-6054
Status Code:A
MSDS Number: CJCZQ

TBA INDUSTRIAL PRODUCTS

ROCHDALE,LANCS,ENGLAND
EN

Emergency Phone: 215-697-6350/215-743-1650

Preparer: JAMES J. BOLGER

Cage: U1309

TBA INDUSTRIAL PRODUCTS

21 ROCHDALE,LANCS,ENGLAND, PA 19124-5622 EN

Telephone: 800-527-1935

Cage: U1309

RUBBER

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9596

ASBESTOS, CHRYSOTILE

CAS: 12001-29-5

RTECS: CI6478500

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 2 FIBERS/CC,A1; 9596

SODIUM CARBONATE

CAS: 497-19-8

RTECS: VZ4050000

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:EYES: DUST MAY CAUSE IRRITATION. SKIN:
DUST MAY CAUSE IRRITATION. INHALATION: DUST MAY CAUSE UPPER
RESPIRATORY TRACT IRRITATION.REPEATED OR PROLONGED INHALATION OF
DUST MAY LEAD TO A BENIGN PNEUMOCONI OSIS. SODIUM CARBONATE DUST IS
AN IHALATION HAZARD AND IS POISONOUS BY THE INTRAPERITONEAL ROUTE;
MAY IRRITATE SKIN & EYES. CHRONIC: LONG TERM EXPOSURE TO ASBESTOS
DUST MAY CAUSE MESOTHELIOMA LUNG CAN CER, ASBESTOSIS. SKIN
IRRITATION/RASH.
Explanation of Carcinogenicity:DUST RELEASED BY MACHINING, ABRADING,
RIVETING CONTAINS ASBESTOS [1332-21-4] LISTED BY NTP,IARC,AND
REGULATED BY OSHA.
Effects of Overexposure:EYES: IRRITATION. SKIN IRRITATION, RASH.
INHALATION: RESPIRATORY TRACT IRRITATION, COUGHING, WHEEZING,
DIFFICULT BREATHING, BENIGN PNEUMOCONIOSIS, MESOTHELIOMA LUNG
CANCER, ASBESTOSIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER . GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH EXPOSED SKIN
WITH SOAP AND WATER. IF PERSISTANT IRRITATION DEVELOPS, GET MEDICAL
ATTENTION. IN HALATION: MOVE TO FRESH AIR. GET MEDICAL ATTENTION.
INGESTION: GET MEDICAL ATTENTION. INGESTED-OBTAIN MEDICAL
ATTENTION.

Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE, CHEMICAL, OR FOAM.
Fire Fighting Procedures:MATERIAL IN/NEAR FIRES SHOULD BE COOLED WITH
WATER SPRAY OR FOG. SCBA, OPERATING IN POSITIVE PRESSURE MODE AND
FULL PROTECTIVE CLOTHING SHOULD BE WORN FOR COMBATIVE FIRES.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION/COMBUSTION MAY
PRODUCE DENSE SMOKE, OXIDES OF CARBON,AND LOW MOLECULAR WEIGHT
ORGANIC COMPOUNDS WHOSE COMPOSITION HAS NOT BEEN DETERMINED.

Spill Release Procedures:IF RELEASE OF GENERATED DUST OCCURS DURING
MACHINING, ABRADING, OR RIVETING, REMOVE DUST BY VACUUMING OR WET
MOPPING. VACUUMS USED SHOULD BE EQUIPPED WITH HEPA FILTERS. DO NOT
USE COMPRESSED AIR TO BL OW DUST FROM THE WORKPLACE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:SHIPPING AND STORAGE MAY RESULT IN
ACCUMULATION OF DUST IN SHIPPING CONTAINERS. DO NOT USE COMPRESSED
AIR TO BLOW DUST FROM STORAGE CONTAINERS.
Other Precautions:REMOVE DUST FROM SHIPPING CONTAINERS BY VACUUMING OR
WET MOPPING. VACUUMS USED FOR THIS PURPOSE SHOULD BE EQUIPPED WITH
HEPA FILTERS.

Respiratory Protection:USE NIOSH-APPROVED RESPIRATOR IF EXPOSURE TO
DUST OR FUMES IN CONCENTRATIONS EXCEEDING PEL'S OR TLV'S IS
POSSIBLE. (SEE 29 CFR 1910.134 FOR RESPIRATORY PROTECTION
STANDARDS).
Ventilation:OPERATIONS THAT PRODUCE DUST SHOULD BE ADEQUATELY EXHAUSTED
TO PREVENT INHALATION OF DUST.
Protective Gloves:WEAR GLOVES TO PREVENT SKIN CONTACT.
Eye Protection:WEAR GOGGLE TO PROTECT EYES FROM DUST.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING TO PREVENT SKIN
IRRITATION FROM EXPOSURE TO DUST.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
ALTHOUGH SEVERAL OF THE INGREDIENTS USED TO FORMULATE THIS PRODUCT MAY
BE HAZARDOUS IN THE RAW STATE, THE MANUFACTURING PROCESS RESULTS IN
A SOLID, INFUSIBLE FORM, BINDING OR OTHERWISE RENDERING THE M
IXTURE INERT.

HCC:N1
Spec Gravity:1.5-2.0
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID MATERIAL. BLACK COLOR. RUBBER ODOR.
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STABLE AT NORMAL TEMPERATURES AND STORAGE
CONDITIONS.
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE. PRODUCT IS
FULLY CURED IN THE MANUFACTURING PROCESS.

Waste Disposal Methods:DISPOSAL OF SOLID WASTE IS REGULATED BY FEDERAL
AND STATE LAW. WASTE SHOULD BE PLACED IN AIRTIGHT CONTAINERS AND
DISPOSED OF IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.